Ways to move oil
- Pipelines are the cheapest way to move large, steady volumes over land, but they take years to permit and build.
- Tankers carry crude and products between continents and give traders the flexibility to send cargoes wherever prices are best.
- Rail costs more per barrel but can be added quickly, which makes it the overflow route when pipelines are full.
- Barges work inland waterways such as the Mississippi and the Rhine.
- Trucks handle short hauls, such as gathering crude from wellsites and delivering fuel to retail stations.
Tanker classes
Tankers are grouped by size, measured in deadweight tonnes (dwt), the weight of cargo, fuel and stores a ship can carry. Crude and dirty products such as fuel oil travel in "dirty" tankers, and refined products such as gasoline, diesel and jet fuel travel in "clean" product tankers.
| Class | Approximate size | Typical cargo |
|---|---|---|
| MR (Medium Range) | 45,000–55,000 dwt | Refined products, around 300,000 barrels |
| Aframax / LR2 | 80,000–120,000 dwt | Crude or products, around 700,000 barrels |
| Suezmax | 120,000–200,000 dwt | Crude, around 1 million barrels |
| VLCC | 200,000–320,000 dwt | Crude, around 2 million barrels |
| ULCC | Above 320,000 dwt | Crude; very few remain in service |
Some names describe routes and rates rather than hull size: "Suezmax" is the largest tanker that can pass through the Suez Canal fully laden, and "Aframax" comes from the Average Freight Rate Assessment system once used to set tanker rates.
Chartering a tanker
Oil companies and traders rarely own the ships they use. They charter them from shipowners on one of three bases:
- Voyage charter. The charterer pays a freight rate for one voyage between named ports, and the owner pays fuel, port costs and crew. Standard forms such as ASBATANKVOY set the terms.
- Time charter. The charterer hires the ship for a period at a daily rate, decides where it goes and pays for fuel and port costs, often on standard forms such as Shelltime.
- Bareboat charter. The charterer takes over the vessel itself, supplying crew and management, for a long period.
Voyage charters allow a set laytime for loading and discharge, with demurrage payable if it is exceeded (see crude oil sales contracts). The timeline behind a claim, such as when notice of readiness was tendered, when the ship was all fast and when hoses were connected and disconnected, has to be recorded carefully.
Freight rates and Worldscale
Tanker voyage rates are usually quoted in Worldscale points. Each year the Worldscale Association publishes a "flat rate" in dollars per tonne for thousands of standard routes, and the market negotiates a percentage of it.
If the flat rate for a route is $20 a tonne and a cargo is fixed at WS 60, the freight is 60% of the flat rate: $12 a tonne. (Illustrative figures.) Owners compare voyages by converting them to a time charter equivalent (TCE), the daily earnings after voyage costs.
Freight is a large part of the netback that decides where a cargo goes. When rates spike, long-haul trades lose out and nearby buyers gain. Fuel is the biggest voyage cost, and since the global 0.5% sulfur cap on marine fuel took effect in 2020, owners have either burned lower-sulfur fuel or fitted exhaust scrubbers.
Chokepoints
Seaborne oil funnels through a handful of narrow passages, and any disruption there ripples through freight rates and prices:
- Strait of Hormuz, the world's most important oil chokepoint by volume, linking the Persian Gulf to the Gulf of Oman and the open ocean.
- Strait of Malacca, the shortest sea route between the Indian Ocean and East Asia.
- Suez Canal and the SUMED pipeline, linking the Red Sea and the Mediterranean.
- Bab el-Mandeb, at the southern entrance to the Red Sea.
- The Turkish Straits and the Danish Straits, carrying exports from the Black Sea and the Baltic.
- Panama Canal, used by smaller tankers between the Atlantic and the Pacific.
When a route closes or becomes unsafe, ships go the long way. For example, after attacks on shipping in the Red Sea from late 2023, many tankers diverted around the Cape of Good Hope, adding days to voyages and tightening the fleet.
Ports, lightering and storage hubs
Many ports are too shallow for a fully laden VLCC. Cargoes are either lightered, meaning transferred at sea into smaller tankers, or discharged at deepwater offshore terminals such as the Louisiana Offshore Oil Port (LOOP). Ship-to-ship transfers are also used to combine or split cargoes.
Storage hubs link transport modes and markets. Cushing in Oklahoma, the Amsterdam–Rotterdam–Antwerp (ARA) region, Singapore and Fujairah in the United Arab Emirates hold large tank farms where oil is stored, blended and traded.
Safety and regulation
International shipping is regulated through the International Maritime Organization (IMO), whose MARPOL convention covers pollution from ships. After the 1989 Exxon Valdez spill, U.S. law and later IMO rules required double hulls on tankers, and single-hull tankers were phased out.
Before chartering a ship, oil companies "vet" it, often using inspection reports from the OCIMF Ship Inspection Report Programme (SIRE). Shipowners carry protection and indemnity (P&I) insurance for liabilities such as pollution and injury.
Where data and software fit
Terminal operations, cargo inspections, tank gauging and voyage timelines all generate records that end up in invoices, demurrage claims and loss reports. Capturing them accurately as events happen, with timestamps and photos, saves weeks of reconciliation later.